Red Zone Enterprises

Your toilet is running.
Now your phone knows.

TankWatch hangs on the tank, senses when water is flowing, and sends a notification when a flapper sticks or a fill valve won't quit — before it becomes a four-figure water bill.

Join the pilot See how it works

No hub · No subscription · 3×AA, about a year

A silently running toilet wastes up to 200 gallons a day. Most run for weeks before anyone hears it.

How it works

Hang it. Connect it. Forget it.

STEP 1 — HANG

Over the tank wall

A thin bracket slips over the tank wall — the lid still seats. Nothing goes in the water. The sealed body hangs outside the tank, so changing batteries never means reaching into a toilet.

STEP 2 — CONNECT

To your own WiFi

Scan the code under the lid, pick your WiFi in the app, done. No hub to buy, no cloud account it can't live without — the beeper works even if your internet doesn't.

STEP 3 — FORGET

Until it matters

It sleeps almost all the time, wakes when the tank does, and checks in with battery status along the way. You'll hear from it when something's wrong — and only then.

The ten-minute rule

Every flush makes the tank refill for a minute or so — that's normal, and TankWatch stays quiet. A running toilet never stops refilling. Flow that won't quit is the tell, and you choose how long is too long.

NORMAL FLUSH
Refills for about a minute, then stops. No alert.
RUNNING TOILET
Still flowing at the 10-minute mark — alert fires.

Chirp in the bathroom. Notification on your phone — even if you're out of town. That's the whole product.

Honest hardware

One sensor and some arithmetic.

There's nothing exotic inside and nothing in the water. A single sensor tells a microcontroller when the tank is refilling, and the microcontroller does the arithmetic. Fewer parts, fewer failures.

  • SENSINGFlow detection from outside the tank — nothing touches the water, nothing corrodes, nothing to clean or recalibrate.
  • ALERTSPush notification to your phone, plus a polite local chirp. It's a plumbing problem, not a fire — the sound is sized accordingly.
  • POWER3×AA batteries, about a year. Low-battery warnings arrive on your phone long before it goes quiet.
  • PRIVACYIt reports one thing: is the tank refilling. No microphone, no camera, nothing to overshare.

Specifications

Radio2.4 GHz WiFi (joins only to send)
Batteries3 × AA lithium
Battery lifeAbout a year typical
Check intervalAdaptive — more often while the tank is active
Alert thresholdContinuous flow past your limit (10 min default)
Local alertPiezo chirp, ~70 dB
HeartbeatTwice daily with battery status
Fits tank wallsUp to 30 mm, lid stays seated
EnclosureMoisture-rated PETG
SubscriptionNone. Ever.
🚽
RUNNING TOILET

Hall bathroom has been running for 10 minutes.

TankWatch · now

Questions

Asked and answered.

Why not just listen for the sound?

Because the expensive failures are the quiet ones — a flapper that seals almost, a fill valve trickling into the overflow tube. TankWatch senses the refill itself, whether or not you'd ever hear it. It also notices a tank that refills in the middle of the night when nobody flushed.

Does it need a hub or bridge?

No. Each unit joins your home WiFi directly and only powers its radio when it has something to say. One device, one battery set, one job.

What happens if my internet is down?

The local chirp still works — detection happens on the device, not in a cloud. The notification catches up when your connection returns.

Will it fit my toilet?

The bracket clears tank walls up to 30 mm — that covers nearly every residential tank — and the lid sits back down over it. If yours is unusual, the pilot is exactly the place to tell us.

Who builds this?

Red Zone Enterprises, a data-reconciliation consultancy in the DC corridor whose reputation is built on one promise: the reports will be right. TankWatch is that promise, pointed at your water bill.